residential internet service providers
So protecting all doors is a must. Example: magnetic circuit breakers. Door contacts may be hardwired or wireless; hardwired contacts are usually buried in the doorframe, which is less obvious than wireless and are preferable. Window Contacts: Can be hardwired or wireless. Motion Sensors: It’s the most essential and common form of protection. Passive infrared sensors: Detect motion by sensing a sudden change in heat. Dual Tech motion detectors use two different technologies in the
same unit: passive infrared and microwave. These devices are designed to avoid false alarms since both technologies must detect motion before setting off the alarm. Photoelectric Sensors: These sensors project a beam of light across a hall or doorway to detect motion and are triggered when a person passing
through interrupts the beam. Glass Break Detectors: Usually mounted near windows to detect the specific high frequency sound of glass being shattered. They are usually installed on a wall opposite or adjacent to the protected glass and are effective within about 15′ to 25′.
The moment light reaches the image sensor, pixels then record how much light they receive. These dark and light areas then form the video images that we see. Motion detection works by comparing successive video images. So if the pattern of light changes between frames a change in pixels the smart camera concludes that something has moved and starts to record. As it begins to record, it also sends you an alert. The camera determines when enough has changed based on the motion detection settings see below.